Poco F1 Changes to One Plus 6

As we got the romour from xda developers the Oxygen custom ROM is out. Since the One Plus OS can be ported to Poco F1 it gains an experience of using One Plus device.As well as Oxygen ROM is out for many Xiaomi Devices.Battery backup as same it drains in the stock MIUI .

 

Requirements

  • POCO F1 with an unlocked bootloader – To Unlock the bootloader of your device, apply here.
  • OxygenOS ROM – Download the ROM of your choice OP6 Build or OP6T Build
  • TWRP for POCO F1 – You can download the recovery file from here.
  • ADB software (For Windows) / Android zip file (For Mac)

If you are on a Mac you need to

  • Extract the Android zip and place the folder on your Desktop.
  • Open Terminal
  • Type cd Desktop/Android
  • Enter ./ADB-Install-Mac.sh

Step 1: Switch off the phone and boot it into Fastboot mode by long pressing
Power and Volume down buttons simultaneously.

Step 2: Connect your phone to PC by a USB cable, open command prompt on your PC and navigate to the folder where you have downloaded TWRP Recovery ZIP.

Step 3: Type ‘fastboot devices’ in command prompt and check if the device is detected by the system.

Step 4: If the system detects the phone, type ‘fastboot flash recovery twrp_filename.img’ and hit enter, the process will be completed in seconds.

Step 5: Now long press the Volume up and Power Button to boot the phone in recovery mode.

Step 6: It will ask to allow modifications, Slide towards the right to allow Modifications.

Step 7: Flash latest PIE Firmware(optional: If you are coming from different ROM other than official MiUi) and Vendor.

Step 8: Make a full wipe (system, data, cache, dalvik).

Step 9: Do factory reset.(Optional : But this is recommended to avoid any issues)

Step 10: Click on ‘Install’, navigate to the location where you have stored ROM file, it’s better to keep ROM file on SD Card or USB OTG drives.

Step 11: Select the ROM file and swipe towards the right to flash.

Step 12: Flash Rom(Oxygen OS).(Gapps are included).

Step 13: Flash vendor patch here (Flash this every time you change vendor).

Step 14: Flash IR Face Unlock here(Optional).

Step 15: Click on ‘Reboot’ and then ‘System’, within 10 minutes device will boot with OxygenOS ROM.

Xda Link :- Oxygen Build for Poco F1

Leave a Reply

Your email address will not be published. Required fields are marked *